CHN 
UAE 
Spain 
France
Russia Products
Video
E-Catalogue
Contact us
Related Pictures
Slanting Bar Spot Welding Machine(3d panel machinery)
Main Technical Specification of Slanting Bar Spot Welding Machine(3d panel machinery)1 The equipment is used for welding 3D structural mesh plate by the slanting stell wires when the upper mesh plate and lower mesh plate and in-between panel of EPS is passed through the equiment.The equiment is also used for welding single surface stell wire mesh plate for external wall heat preservation.
2 Adopt wholly pneumatic operation mode with stable operation,good reliability and long equiment lifetime.
3 Adopt integrated pneumatic wire-clamping device for finishing the forward procedure.
4 Adopt the integrated self-adaptation wire-welding device for finishing the welding procedure.
5.Provice the self-checking function and the failure automatic alarm function with easy poreation adn easy maintenance.
6.Adopt PLC adn touch screen control,and can automatically finish to straighten,weld and cut the stell wire.
7.Can produce two kinds of panels with either dense or sparse insertion.
Main Technical Data of Slanting Bar Spot Welding Machine:
| No. | Items | Type\ Unit |
Specification |
| 1 | Main equipment dimension | mm | (L*M*T)4200X1850X2600 |
| 2 | Weight | kg | 6000 |
| 3 | Power supply | 380V 50HZ 75KVA | |
| 4 | Steel wire diameter | mm | 1.8-2.8 |
| 5 | 3D plate defect welding rate | c/o | <=1%(for single swface 30 panel) <=3%(EPS <=80mm) <=3%(for both surface of the 3D plate and the thickness of EPS <=80mm) <=5%(EPS <=100mm) <=5%(for both surface of the 3D plate and the thickness of EPS <=100mm) |
| 6 | GL plate diagonal error | mm | <=5 |
| 7 | Production efficiency | s/step or m2/h | 0.5s/step or 78m2/h 4.5s/step 48m2/h |
| 8 | Stand of forming machine | stands | 19 |
| 9 | Size of material | mm | (600~1000)×(0.4~0.8)×L |
| 10 | Material | EPS,PU,Mineral Wool | |
| 11 | Suitable Material | Colored galvanized steel board | |
| 12 | Controlling system | PLC |